IP65 vs IP67 vs IP68 LED Strip Lights: Waterproof Rating Guide

IP65, IP67 and IP68 LED strip lights provide different levels of protection against dust and water. IP65 is commonly used for splash-resistant indoor or sheltered installations, IP67 for temporary water exposure, and IP68 for applications designed for continuous submersion under manufacturer-specified conditions. The rating alone is not enough: cable exits, connectors, cut ends, installation method and chemical exposure must also be considered.

Quick Answer

RatingWater ProtectionTypical Applications
IP20No water protectionDry indoor coves, cabinets and shelves
IP65Protected against water jetsKitchens, bathrooms, sheltered signage and damp areas
IP67Protected against temporary immersionOutdoor architectural details, wet areas and ground-level installations
IP68Designed for continuous immersion under declared conditionsPools, fountains and specialized submerged lighting

Always confirm the supplier’s test conditions and intended application. An IP68 product is not automatically suitable for every pool, saltwater, high-temperature or chemically treated environment.

What Does an IP Rating Mean?

IP means ingress protection. The first digit describes protection against solid particles and the second digit describes protection against water. For LED strips rated IP65, IP67 or IP68, the first digit 6 indicates dust-tight protection. The second digit identifies the water protection level.

IP65 LED Strip Lights

IP65 strips are generally protected by a silicone coating or extrusion that resists dust and water jets. They are often selected for kitchens, bathrooms, covered outdoor signs and other damp locations where the strip will not be submerged.

IP65 is practical when heat dissipation, compact size and installation flexibility are important. However, cut points and cable connections must be resealed correctly after modification.

IP67 LED Strip Lights

IP67 products are designed to resist temporary immersion under defined test conditions. A fully enclosed silicone sleeve or sealed construction is normally used. IP67 can be suitable for exposed architectural details, outdoor landscaping and wet zones where occasional water accumulation may occur.

It should not be treated as a universal underwater rating. Long-term immersion, water pressure, installation depth and repeated thermal expansion can require a different product design.

IP68 LED Strip Lights

IP68 indicates protection for continuous immersion under conditions declared by the manufacturer. The maximum depth, duration, water type and temperature should be documented for the specific model.

Pool and fountain projects may also involve chlorine, salt, ultraviolet exposure and waterproof cable systems. Ask for a complete installation specification rather than selecting a strip only because its label says IP68.

Why Waterproof Installations Still Fail

  • Cut ends are not resealed with the correct end cap and sealant
  • Cable joints or connectors have a lower IP rating than the strip
  • Water travels along the cable into the strip enclosure
  • The strip is bent below its minimum bend radius
  • Heat cannot escape from a sealed, high-wattage installation
  • Chemicals, salt or ultraviolet exposure attack the enclosure material
  • The power supply is installed in an unsuitable location

How to Choose the Correct Rating

For a dry interior, an IP20 strip in an aluminum profile is often sufficient. For splashes or damp areas, consider IP65. For temporary water exposure, consider IP67. For continuous underwater use, request a purpose-designed IP68 model and confirm the declared operating conditions.

The final selection should also consider voltage, wattage, PCB width, color temperature, CRI, maximum run length and driver location. See our 12V vs 24V LED strip guide when planning the electrical system.

Information to Include in an RFQ

  • Indoor, outdoor or underwater application
  • Expected water exposure and installation depth
  • Fresh water, salt water, chlorine or chemical exposure
  • Ambient and operating temperature
  • Voltage, wattage, CCT, CRI or color-control requirement
  • Required run length and feed arrangement
  • Cable length, exit direction, connector and end-cap requirements
  • Quantity, reel length, labeling and packaging requirements

FAQ

Is IP65 suitable for outdoor use?

It can be suitable for sheltered outdoor installations, but direct rain, standing water, UV exposure and temperature changes must be evaluated. Exposed locations may require IP67 or another purpose-designed system.

Can an IP67 strip be used underwater permanently?

Not normally. IP67 addresses temporary immersion. Continuous submersion requires a model designed and declared for that use.

Does cutting a waterproof strip affect its rating?

Yes. Cutting opens the protective enclosure. The new end must be sealed with compatible accessories and according to the manufacturer’s method.

Related AHA Lighting Products

Tell AHA Lighting where and how the strip will be used so we can match the waterproof construction, electrical specification and OEM packaging to your project.

Leave a Comment

Your email address will not be published. Required fields are marked *